Product name: Stainless steel dustbin-SJ5005 

Product specification: 

1. Size: 950X 460x 820mm. 

2. Material: all 304 stainless steel wire drawing plate. The thickness of barrel body material is 2.0 mm, and the thickness of barrel cover is 2.0 mm. (plus-minus tolerance 0.05 mm) . 

3. Place in three compartments (recyclables/hazardous waste/other waste) . 

Four. The lift type barrel cover is connected with the barrel body to avoid the loss or theft of the garbage can parts, and is convenient for the daily use of the staff. 

5. Etch Mark: Airport Mark, other garbage recycling mark in line with the national garbage Mark GB/T 19095 & mdash; 2008, need to add the number mark of the garbage bin on the surface of the garbage bin, engraving depth 0.4 mm. 

6. The inside and outside of the dustbin are fireproof and waterproof. The bottom of the dustbin is fully welded and the side of the inner bin is sealed with glass glue. 

7. Curved barrel body design, smooth lines, no sharp angle without cutting edge. 

8. Stainless steel liner with 1.0 mm thickness.